Red label paper when exposed to water
Turning red when in contact with water is a warranty service for products such as mobile phones, batteries, electronics, and electrical LCDs that are difficult to identify or incorrectly identified after being damaged by water, and do not meet the conditions for control. At the same time, turning red when in contact with water is also a new type of product developed for identifying water ingress in long-distance transportation goods and providing legal basis for claims. The main function of the water turning red label is to show that when the substrate is completely exposed to water, the surface will turn red when exposed to water, and the color will be significantly different from before, and irreversible
Characteristics of turning red when encountering water
The main function of turning red when in contact with water is that when the substrate is completely exposed to water, the surface will turn red when in contact with water, and the color will be significantly different from before, and irreversible
2. It turns red when exposed to water. Based on the critical humidity at which the product is damaged after exposure to water, it can be designed to change color according to the preset relative humidity or only when completely immersed in water
3. There are two main types of waterproof labels that turn red when exposed to water: water diffusion: when the label turns red when exposed to water, the original pattern on the label will quickly spread around it. Color development in water: When the water turns red label is immersed in water, the original color of the water turns red label will quickly spread and completely change to another preset color
4. It turns red when exposed to water and can be used in electronic products such as mobile phones, lithium batteries, MP3 players, etc
When in contact with water, it turns red. Scope of use
The anti-counterfeiting label that turns red when encountering water can accurately detect abnormal results when entering the liquid. When abnormalities occur, the responsible party can be clearly identified to protect the rights and interests of both merchants and consumers. Turning red when in contact with water has a strong sensitivity to humidity and can accurately display the degree of moisture on the surface. Turning red when in contact with water is mainly used to test the identification of product entry and can have an aesthetic effect. Clearly define the responsibility for circuit damage caused by liquid ingress in electronics, circuits, batteries, mobile phones, etc
Laser specific printing paper stickers
The commonly used material for laser printers in the market is adhesive paper, but the high temperature and speed of the printer make the pressure-sensitive adhesive prone to adhesive leakage and damage under high temperature, while dedicated laser printing paper stickers can solve this problem
Offset paper, also known as writing paper, is made by coating the back with a bottom layer to make the adhesive more firm. The CCK release paper on the back of the material is resistant to high temperatures and does not wrinkle, making the paper entry and exit of the laser printer smoother, without jamming or glue leakage. Generally, monochrome printing or printing is used for barcode information labels, and laser printers can also be selected for direct writing. As long as the design does not require narrow angle turns, the printing effect can be better achieved
A4 adhesive printing paper
Biodegradable stickers
OwnLikes has developed Cellulose paper film products in response to the requirements of sustainable development, circular economy, and environmental plastic removal in the packaging market, combining advanced technologies at home and abroad< br /> Recycling: Product raw materials are sourced from recycled ingredients, renewable resources: Product raw materials are sourced from biomass resources such as forests, plants, etc., rather than petroleum. Reduction: Product thinning, weight reduction, and plastic reduction, using less raw materials. Monomer structure replaces composite structure. Biodegradable: biodegradation, industrial degradation, oxygen degradation, photodegradation. High transparency, good tensile strength. Innovative coating process enhances printing adaptability and moisture resistance. FSC certification (certificate number RINA-CO-001475) SGS bovine degradation certification (SO certificate number: GZIN2111064903MR)
PE winding cable label
Wrapped cable labels, also known as covered cable labels, consist of two parts. The upper part is a white or colored printed coating, and the lower part is a transparent protective film. When in use, the printed area can be covered with a transparent protective film for protection. The transparent protective film should have sufficient length to wrap the cable in one or a half turns, and the adhesive position should be within 3-10 centimeters from the cable joint. The label content should be clear and visible, and the label should be made of a medium that is not easily detached. The diameter of the cable determines the length of the required wrapped label
Product Features
1. A material specifically designed for cable identification, which is a matte treated transparent polyolefin film with acrylic pressure-sensitive adhesive
2. Leave a blank area for heat transfer printing
3. The appearance is uniform, transparent, and has good waterproof and oil resistant properties
4. The effect is natural and harmonious, with excellent performance
5. Used in situations where PE label materials cannot be used due to environmental requirements
6. After laminating, there are multiple colors available for selection, including red, orange, yellow, green, and green
7. Various specifications can be customized according to customer requirements
Synthetic paper multi-layer stickers
Synthetic paper multi-layer sticker (a type of PP material): It looks like paper, has a matte white color, and has undergone biaxial stretching treatment. The material is tough and has good resistance to compression. At the same time, it has good thermal transfer printing performance and a hard material texture, suitable for flat or hard surfaces. It is widely used in electronic components and daily chemical products.
