Classification of sterilization indicator cards How long can it last?

Steam sterilization instruction label/card/tape

Coated with color changing ink as a sterilization indicator, back coated with pressure-sensitive adhesive release paper, the label is printed with thermosensitive chemical material, which can be used inside the packaging of the item or attached to the surface of the sterilization package. Under the required sterilization conditions, the indicator color code changes from yellow to black, and the color after sterilization is not easy to fade

Instructions for use:

1. Remove the steam ethane sterilization indicator label from the backing paper and directly stick it to the surface of the sterilized item package. Gently press the label to enhance its sealing effect, and then place it in the steam sterilization pot for sterilization treatment

2. After sterilization, take out the package and observe the color change of the indicator label. If the label changes from yellow to black, it indicates that the package has been sterilized; If the label color remains unchanged, it indicates that the package has not undergone sterilization treatment

Suitable for hospitals, pharmaceuticals, food, health products, beverages, hygiene and epidemic prevention, medical device manufacturers, and sterilization service institutions to perform pressure steam sterilization, used to indicate whether the sterilization package has undergone pressure steam sterilization treatment, and also used for steam sterilization indicator effect testing and judgment

Low temperature plasma sterilization indicator label/card/tape

Apply thermosensitive chemical color changing ink as a sterilization indicator, and back coat with pressure-sensitive adhesive release paper. It can be used inside item packaging or attached to the surface of the sterilization package. Under the required sterilization conditions, the color of the indicator color code changes from red to yellow, and the color after sterilization is not easily faded

Instructions for use

1. Remove the plasma sterilization indicator label from the backing paper and directly stick it to the surface of the sterilized item package. Gently press the label to enhance its sealing effect, and then place it in the plasma sterilizer for sterilization treatment

2. After sterilization, take out the package and observe the color change of the indicator label. If the label changes from red to yellow, it indicates that the package has been sterilized; If the label color remains unchanged, it indicates that the package has not undergone sterilization treatment

Suitable for hospitals, pharmaceuticals, food, health products, beverages, hygiene and epidemic prevention, medical device manufacturers, and sterilization service institutions to perform plasma sterilization, used to indicate whether the sterilization package has undergone plasma sterilization treatment, and also used for plasma indicator effect detection and judgment

Formaldehyde sterilization instruction sticker/card

Chemical substances, color developing agents, and their auxiliary materials are made into ink and printed on special cardboard. The ink is then discarded and the indicator color block is displayed. Under the required sterilization conditions, the indicator color block changes from red to green to quickly and intuitively reflect whether the sterilized item has undergone sterilization treatment. The color after sterilization is not easily faded. This product is specifically designed to be pasted on the outside of the package to be sterilized, indicating whether the package has undergone formalin sterilization process to prevent mixing with unsterilized packages

Instructions for use:

1. Place the formalin sterilization indicator card in the center of the standard test package or item, with one end of the card surface printed with the indicator. Place it in the middle of the item package, and the indicator card should be placed at the intersection of the hard container or at least two diagonals, or in the most difficult to sterilize area. During each sterilization process, place one indicator card in each large bag and in the difficult to sterilize area. Wrap the indicator card with gauze or kraft paper to prevent it from getting damp and affecting the result judgment

2. According to the routine of sterilization operation, after one sterilization cycle, the indicator card color block changes from red to green, indicating that the sterilization package has been sterilized; If the color change on the indicator card is uneven or there is no change in color, it indicates that the package has not been sterilized

Suitable for hospitals, pharmaceuticals, food, health products, beverages, hygiene and epidemic prevention, medical device manufacturers, and sterilization service institutions to disinfect and sterilize formalin, used to indicate whether the sterilization package has undergone formalin sterilization and disinfection process

Gamma Cobalt 60 Sterilization Indicator Label

Coated with thermosensitive chemical color changing ink as a sterilization indicator, and backed with pressure-sensitive adhesive release paper, it can be used inside item packaging or attached to the surface of the sterilization package. Under the sterilization conditions of gamma cobalt 60Co gamma electron beam radiation, the color of the indicator color code changes from yellow to red, and the color after sterilization is not easily faded.

Cobalt-60 sterilization is the process of using 60Co gamma rays to irradiate microorganisms, directly or indirectly damaging their nuclei, thereby killing microorganisms and achieving disinfection and sterilization. It is a type of irradiation sterilization technology that uses V-rays generated by the radioactive isotope cobalt-60 to irradiate packaged food. In the process of energy transmission and transfer, strong and enhanced physical and biological effects are generated to achieve the goals of insecticide, sterilization, inhibition of physiological processes, food hygiene quality, maintenance of nutritional quality and flavor, and extension of shelf life

Suitable for hospitals, pharmaceuticals, food, health products, beverages, hygiene and epidemic prevention, medical device manufacturers, and sterilization service institutions to sterilize gamma cobalt-60 electron beam, used to indicate whether the sterilization package has undergone plasma sterilization treatment, and also used for gamma cobalt-60 indicator effect testing and judgment

Sterilization instruction label

Sterilization indicator label is a special label used to monitor and indicate whether an item has undergone sterilization treatment. It is usually made of corrugated paper or label paper as the substrate, coated with color changing ink as a sterilization indicator, and back coated with pressure-sensitive adhesive. Under the standard conditions of pressure steam sterilization treatment temperature, temperature duration, and steam saturation, the indicator color block of the sterilization indicator label will change color, such as from light yellow to black, to intuitively reflect whether the sterilization result is qualified

The main uses of sterilization indicator labels include:

1. Indicate whether the item package has undergone pressure steam sterilization process
2. If the discoloration is uneven or incomplete, it may indicate that the package has not undergone sterilization treatment that meets the conditions
3. Sterilization information can be recorded, such as the operator, sterilization expiration date, package item name, pot, etc

There are various types of sterilization indicator labels, including single label, roll label, traceable label, etc., which are suitable for different sterilization needs and scenarios. In addition, with the continuous development of medical technology, the performance and types of sterilization indicator labels are also constantly updated and improved to meet a wider range of sterilization monitoring needs

We offer comprehensive technical support, including free professional labeling solutions, advice on label materials and adhesive selection, as well as online/offline assistance from professional software and hardware engineers. Service email: andy@ownlikes.cn. In pre-sales, we leverage our extensive experience in specialty labeling projects to provide clients with the most suitable hardware solutions. Additionally, all our label barcode printers and scanners come with a three-year free warranty, demonstrating our confidence in our products.