Belt vulcanization label material
Used for belts, hoses, air springs, and other rubber products. Print real-time variable data on pre printed materials using a heat transfer printer, and then transfer it to rubber materials through heat transfer and pressure transfer. The heat and pressure generated by vulcanization can permanently transfer the identification onto the rubber. It can also be applied after vulcanization, and different colors can further distinguish the type and production line of the product. Provide efficient product management solutions for belt and rubber enterprises
Features and Advantages
There are multiple colors that can be used before and after vulcanization. It can be used for low-temperature printing of EPDM rubber and fluoroprene rubber. Real time variable data can be printed on pre printed materials, and the barcode and visible text recognition rate are high after vulcanization
Material List for Belt Vulcanization Labels
High temperature resistant steel label material
The steel industry identification is specifically used for coating metal label materials on steel formed parts such as plates, coils, wires, and bars. At the same time, excellent coating technology makes barcode printing and printing feasible. Due to the special nature of the industry, label materials must withstand extreme high temperatures, acid and alkali, oil stains, and friction during production and transportation, as well as various impacts such as harsh weather conditions
High temperature resistant steel labels are used in extremely harsh production environments for steel and aluminum materials. Excellent coating technology makes them suitable for heat transfer printing, with an extreme temperature resistance of 1300 ° C; C。 Used for tracing information such as steel grade, production batch, production flow, specifications, weight, etc. throughout the entire heat treatment process
Application
Marking of plates, wires, rods, coils, and pipes
Steel wire, steel coil, and section steel
Aluminum products
Continuous casting production, die-casting molds
High pressure gas cylinder
Inventory management, process management
Features and Advantages
Multiple materials and different thicknesses
Polyacrylic acid adhesive and silicone, halogen-free
Excellent printing and printing effect
Can withstand 1300 ° C; High temperature, high-strength substrate, tear resistant
Super adhesive, resistant to chemicals, moisture, and dirt
Thermal transfer printing coating, compliant with REACH and ROHS standards
Printable ceramic barcode label material
Glass ceramic bathroom label materials can be used for identification and barcode management of ceramics, glass, light bulbs, steel, and wheel products. After permanent curing, the label and printed image can withstand 1300 degrees Celsius; High temperature and excellent friction resistance
Used for belt and ceramic bathroom label materials, it can be used for metal and ceramic product identification and barcode surface, 300° C or above can be permanently cured in 30 minutes, and after curing, it can withstand 1300 degrees Celsius; High temperature, excellent wear resistance, water washing resistance, and scratch resistance
Features and Advantages
There are two types of coatings: transparent and white Easy to print and print
300° C or above, permanently cured for 30 minutes, and can withstand 1300 ° C after curing; C high temperature
Can be used on the surface of ceramics, glass, and light bulbs
Wear resistant and scratch resistant
Can withstand the harsh production environment of the ceramic bathroom and glass industry
Ultra high temperature resistance and good performance
The substrate is made of inorganic materials Waterproof, acid-base, most oil stains, and low-fat solvents
Usage
1. Immerse the label in water and remove the backing paper. The label will curl up in the water, and after a while, the water will penetrate into the label. After 5-10 seconds, the backing paper can be torn off< br /> 2. When applying labels, it is necessary to slowly slide one side of the label onto the object to attach the label. Avoid label wrinkles and air ingress. If the label is wrinkled or air enters, it may be easily peeled off
Material List for Printing Ceramic Barcode Labels
About Material Roll Packaging Information
Material width: 530mm, 1070mm (can be cut into any width size)
Substrate thickness: 25um, 50um, 75um, 100um optional
Release paper: 80g Gracin base, 120g offset paper base
Material Core: Paper Core Wall Thickness 5mm * Inner Diameter 75um
Packaging method:
500M-1000M length: first wrap with wrapping film and foam, then wrap the edge products with corrugated paper, and then fix the material roll with packing rope to the card board
1500M-3000M length: wrap with wrapping film and foam, add a plug to the shaft core, and then fix the wood plate on the side of the material roll with wrapping rope
Material roll diameter: as shown in the figure
Regarding the transportation information of material rolls
20 foot container: internal dimensions 5.69 meters X 2.13 meters X 2.18 meters/gross weight of goods generally 17.5 tons/volume 24-26 cubic meters
Card size: 15mm * 1M * 1.1M * 1.5M
Number of cardboards: Maximum number of rolls 52 rolls 1.07M * 1500M
Applicable Material Rolls: Length 500M, 1000M, 1500M, Cut Material Rolls
40 foot container: internal dimensions of 11.8 meters X 2.13 meters X 2.72 meters/gross weight of goods generally 22 tons/volume of 68 cubic meters
Card size: 15mm * 1M * 1.1M * 1.5M
Number of cardboards: Maximum number of rolls 55 rolls 1.07M * 3000M
Applicable Material Rolls: Length 2000M, 3000M, 5000M
