500um engineering tire vulcanization label
Excellent high temperature stability, able to withstand the heat and pressure of tires during high temperature and sulfur treatment (up to 210 ℃)
Excellent durability and wear resistance
Excellent chemical corrosion resistance: Strong waterproof, acid resistant, salt resistant, alkali resistant, most petroleum oil stains, oils and low-fat solvents, adhesives can penetrate into the concave surface and firmly bond to the softening agent that penetrates the tire surface. When the car is in operation, the barcode will not fall off on its own, and manual peeling will not damage the rubber on the tire surface
Excellent barcode/heat transfer printing effect, combined with Xiyan VR-30 carbon ribbon, ensures 100% accurate reading and scanning on the high-speed conveyor line before and after vulcanization
Excellent adhesion: When the tire is removed from the mold, it has strong flexibility to withstand tire deformation
| Physical properties | Testing Method | Average test result | |
| Thickness | ASTM D1000 test | US units | Standard unit |
| Substrate | 0.012in | 0.480mm | |
| Adhesive | 0.0010in | 0.026mm | |
| Total | 0.0108in | 0.51mm | |
| Initial adhesion (sticking to steel ball) | ASTM D3759 test | Approximately equal to 3 # steel ball | |
| Adhesive strength: | FTM8 test | >12 hours | |
| Temperature range | -40 to 428° F (-40~220° C) | ||
| Save expiration date | 73.4° F (23° C) Under 60% relative humidity, it is 1 year | ||
| UL index number | To be tested | ||
| UL testing carbon ribbon | OwnLikes VR-30 | ||
All SI units are calculated from the commonly used units in the United States
350um tire vulcanization label
Excellent high temperature stability, able to withstand the heat and pressure of tires during high temperature and sulfur treatment (up to 210 ℃)
Excellent durability and wear resistance
Excellent chemical corrosion resistance: Strong waterproof, acid resistant, salt resistant, alkali resistant, most petroleum oil stains, oils and low-fat solvents, adhesives can penetrate into the concave surface and firmly bond to the softening agent that penetrates the tire surface. When the car is in operation, the barcode will not fall off on its own, and manual peeling will not damage the rubber on the tire surface
Excellent barcode/heat transfer printing effect, combined with Xiyan VR-30 carbon ribbon, ensures 100% accurate reading and scanning on the high-speed conveyor line before and after vulcanization
Excellent adhesion: When the tire is removed from the mold, it has strong flexibility to withstand tire deformation
| Physical properties | Testing Method | Average test result | |
| Thickness | ASTM D1000 test | US units | Standard unit |
| Substrate | 0.012in | 0.350mm | |
| Adhesive | 0.0010in | 0.026mm | |
| Total | 0.0108in | 0.376mm | |
| Initial adhesion (sticking to steel ball) | ASTM D3759 test | Approximately equal to 3 # steel ball | |
| Adhesive strength: | FTM8 test | >12 hours | |
| Temperature range | -40 to 428° F (-40~220° C) | ||
| Save expiration date | 73.4° F (23° C) Under 60% relative humidity, it is 1 year | ||
| UL index number | To be tested | ||
| UL testing carbon ribbon | OwnLikes VR-30 | ||
All SI units are calculated from the commonly used units in the United States
250um tire vulcanization label
Excellent high-temperature stability, capable of enduring the heat and pressure (up to 210℃) during tire usage and vulcanization with sulfur.
Outstanding durability and wear resistance.
Excellent chemical resistance: Strong waterproofing, resistant to acids, salts, alkalis, most petroleum stains, oils, and low-fat solvents. The adhesive can penetrate into concave surfaces, firmly bonding with the softener that penetrates out of the tire surface. When the vehicle is in operation, the barcode will not fall off spontaneously, and forced manual peeling will not damage the rubber on the tire surface.
Excellent barcode/thermal transfer printing effect, combined with XiYan VR-30 ribbon, ensuring 100% accurate scanning and reading on high-speed conveyors before and after vulcanization.
Excellent conformability: When the tire is removed from the mold, the strong flexibility can withstand tire deformation.
| Physical Properties | Test Method | Average Test Results | |
| Thickness | ASTM D1000 Test | US Units | SI Units |
| Base Material | 0.0098 in | 0.250 mm | |
| Adhesive | 0.0010 in | 0.026 mm | |
| Total | 0.0108 in | 0.276 mm | |
| Initial Tack (Adhesion to Steel Ball) | ASTM D3759 Test | Approximately equivalent to a 3# steel ball | |
| Adhesion Duration: | FTM8 Test | ＞12 hours | |
| Temperature Range | -40 to 428°F (-40~220°C) | ||
| Shelf Life | 1 year at 73.4°F (23°C) and 60% relative humidity | ||
| UL File Number | To be determined | ||
| UL Test Ribbon | OwnLikes VR-30 | ||
All SI units are calculated from US customary units.
188um bright white rubber vulcanization label
Excellent high-temperature stability, enduring the heat and pressure (up to 210℃) during tire usage and sulfur treatment.
Outstanding durability and resistance to wear.
Excellent chemical resistance: Strong waterproofing, resistant to acids, salts, alkalis, most petroleum stains, oils, and low-fat solvents. The adhesive can penetrate into concave surfaces, firmly bonding with the softening agent that seeps out of the tire surface. This ensures that the barcode does not fall off spontaneously during vehicle operation, and forced removal by humans will not damage the tire's rubber surface.
Exceptional barcode/thermal transfer printing effect, combined with XiYan VR-30 ribbon, ensuring 100% accurate scanning and reading on high-speed conveyor lines before and after vulcanization.
Excellent conformability: When the tire is removed from the mold, its strong flexibility accommodates tire deformation.
| Physical Properties | Test Method | Average Test Results | |
| Thickness | ASTM D1000 Test | US Units | Standard Units |
| Base Material | 0.0074in | 0.188mm | |
| Adhesive | 0.0010in | 0.026mm | |
| Total | 0.0084in | 0.214mm | |
| Initial Adhesion (Adhesion to Steel Ball) | ASTM D3759 Test | Approximately equivalent to a #3 steel ball | |
| Sustained Adhesion: | FTM8 Test | ＞24 hours | |
| Temperature Range | -40 to 428°F (-40~220°C) | ||
| Storage Life | 1 year at 73.4°F (23°C) and 60% relative humidity | ||
| UL File Number | To be determined | ||
| UL Test Ribbon | OwnLikes VR-30 | ||
All SI units are calculated from US customary units.
125um car tire vulcanization label
Excellent high-temperature stability, enduring the heat and pressure (up to 210℃) during tire usage and sulfur treatment.
Outstanding durability and wear resistance.
Excellent chemical resistance: Strong waterproofing, resistant to acids, salts, alkalis, most petroleum stains, oils, and low-fat solvents. The adhesive can penetrate into concave surfaces, firmly bonding with the softening agents that seep out from the tire surface. This ensures that the barcode will not fall off spontaneously during vehicle operation, and forced removal by humans will not damage the tire's rubber surface.
Remarkable barcode/thermal transfer printing effect, combined with OwnLikes V-30 ribbon, ensuring 100% accurate scanning and reading on high-speed conveyors before and after vulcanization.
Excellent conformability: When the tire is removed from the mold, its strong flexibility accommodates tire deformation.
| Physical Properties | Testing Method | Average Test Results | |
| Thickness | ASTM D1000 Test | US Units | Metric Units |
| Base Material | 0.0049 in | 0.125 mm | |
| Adhesive | 0.0010 in | 0.026 mm | |
| Total | 0.0059 in | 0.151 mm | |
| Initial Tack (Adhesion to Steel Ball) | ASTM D3759 Test | Approximately equivalent to a 3# steel ball | |
| Sustained Adhesion: | FTM8 Test | ＞24 hours | |
| Temperature Range | -40 to 428°F (-40~220°C) | ||
| Storage Life | 1 year at 73.4°F (23°C) and 60% relative humidity | ||
| UL File Number | To be determined | ||
| UL Test Ribbon | OwnLikes VR-30 | ||
All SI units are calculated from US customary units.
